N/A = Not Applicable MATERIAL SAFETY DATA SHEET Effective Date:
Oct 2002
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SECTION 1 - PRODUCT IDENTIFICATION Revised Date: Aug 2005
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Product
Name: ACTIVE Product ID#:
101175 HMIS
SYMBOL HMIS
NFPA NFPA SYMBOL
Generic
Name: Pot Wash
HEALTH |1|
SEVERE
4 EXTREME FIRE
|0|
Supplier's
Name: BIRSCH INDUSTRIES, INC. FLAMMABILITY |0| SERIOUS 3 HIGH REACTIVITY |0|
Supplier's
Address: 476 Viking Drive, Suite 102 REACTIVITY |0| MODERATE
2 MODERATE TOXICITY |1|
Emergency
Phone Number: (800) 255-3924:
MINIMAL 0 INSIGNIFICANT
Information
Phone Number: (757) 622-0355
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SECTION 2 - INGREDIENTS
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CHEMICAL
NAME
CAS # WT.
% TWA-TLV STEL-TLV CARCINOGEN
MG/M3 MG/M3
Neutralized
Dodecylbenzinesulfonic acid 27176-87-0 <25.0 N/A N/A
No
*MEA
141-43-5 <
3.0 7.5 15
No
Sodium
Lauryl Ether Sulfate
9004-82-4 <
8.0 N/A N/A
No
Coconut
Diethanolamide
8051-30-7 <
8.0 N/A N/A No
Sodium
Lauryl Sulfate
151-21-3 <
5.0 N/A N/A
No
Water 7732-18-5 to
100 N/A N/A
No
*
This product contains the following toxic chemicals subject to
the
reporting requirements of section 313 of the Emergency Planning
and
Community Right-To-Know Act of 1988 and of 40 CFR 372.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SECTION 3 - PHYSICAL DATA | SECTION 4 - FIRE AND
EXPLOSION HAZARD DATA
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Boiling
Point (F): >212o Specific
Gravity: 1.02 | Flash Point (Method Used): None to
boil
Vapor
Pressure: N/A Vapor Density: (Air=1): N/A |
Upper Explosive Limit: None
%
Volatile: N/A pH: 7.0-7.5 | Extinguishing Media: N/A
Solubility
in Water: Yes Evaporation Rate: (Water=1):
<1 | Special Fire Fighting Procedures: None
Physical
Description: Red liquid, slight perfume odor | Unusual Fire & Explosion Hazards: None
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SECTION 5 -
REACTIVE DATA | SECTION 6 - STORAGE AND
HANDLING INFORMATION
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Stability:
Stable
Hazardous
Polymerization: Will not occur |
Precautions to betaken in handling and storage: Do not stack cases or pails
Incompatibility
(Materials to Avoid): Do not mix with ANY other chemicals | over five high.
Hazardous
Decomposition Products: None |
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SECTION 7 - HEALTH HAZARDS
AND FIRST AID
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Effects of Overexposure
|
First Aid Procedures
Primary Route of Entry: Skin |
Skin: May produce irritation or burns to
skin. |
Skin: Immediately wash with plenty of water while removing clothing.
Eyes: Can cause irritation if applied
directly to eyes. | Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes. Seek
| medical
aid.
Inhalation: Mists may produce respiratory
irritation. | Inhalation: Remove
to fresh air Seek medical aid if irritation persists.
Ingestion: Can cause irritation to mouth
throat and stomach. |
Ingestion: DO NOT induce vomiting. Give large quantities of water.
|Seek medical aid.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SECTION 8 - SPECIAL
PROTECTION INFORMATION
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Respiratory
Protection: Where established exposure limits may be exceeded | Ventilation: Local exhaust is
recommended
use a NIOSH-approved
equipment. |
Protective
Gloves: Rubber
|
Eye Protection: Chemical splash goggles.
Other
Protective Equipment: None
|
PLEASE
READ AND FOLLOW THE DIRECTIONS ON THE PRODUCT LABEL. THEY ARE YOUR BEST GUIDE
FOR THIS PRODUCT IN THE
AND
THEY ALSO GIVE THE NECESSARY SAFETY PRECAUTIONS TO PROTECT YOUR HEALTH.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SECTION 9 - SPILL OR LEAK
PROCEDURES
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Steps
to be Taken in Case Material is Released or Spilled:
Mop, vacuum or |
Waste Disposal Method: Dilute with plenty of water and flush into sewer system.
wash away with
water. |
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------